Pioneer Elite PureVision PRO 1110HD - Manual (Page 44)

09 Basic Adjustment Settings
44
En
Setting up digital TV channels
This section describes how to search and set up
digital TV channels that you can watch under the
current conditions. Unless you set up digital TV
channels using Auto Channel Preset, you cannot
tune in those channels.
Using Auto Channel Preset
Auto Channel Preset automatically searches and
sets up digital TV channels.
1 Press HOME MENU.
2 Press / to select “DTV Setup”, and then
press ENTER.
3 Press / to select “DTV Channel Setup”,
and then press ENTER.
4 Press / to select “Auto Channel Preset”,
and then press ENTER.
5 Press / to select “Air” or “Cable”.
Auto Channel Preset
Air/Cable Air
Start
6 Press / to select “Start”, and then press
ENTER.
Auto channel preset searching. Please
wait.
To cancel auto channel preset, press
[RETURN].
PLASMA DISPLAY
• Channel search automatically starts.
7 Press HOME MENU to exit the menu.
• With “Cable” selected, this system can receive only
digital TV signals (Standard Channel Plan) with the
8VSB modulation. This system does not support the
QAM modulation.
PDP-ELITE-Eng (40-56) 9/9/03, 11:45 44