Panasonic AG-VP300P - Manual (Page 11)

11
Be
fo
re
U
s
e
Control reference guide (continued)
ª TV OPERATION
Only Panasonic TVs can be operated with the provided remote
control. The settings for operating the TV with the remote control
have already been made.
No additional settings need to be performed.
However, some Panasonic TVs cannot be operated using this
remote control.
When you operate the TV, always select “TV” with the
[VCR/TV/DVD] switch.
If “TV” is not selected, normal operation will not be possible.
(1) Numeric buttons (0 – 9, 100)............... ( l page 15,20)
≥Selects the television channel.
(2) Television input mode selector (AV)
≥Selects TV input or AV input.
(3) TV POWER button (TV Í)
Press to switch the TV from on to standby mode or vice
versa. In standby mode, the TV is still connected to the
mains.
≥With some TV models, it may only be possible to switch the
TV to the standby mode using this button.
In this case, use [AV], [CH]
IJ or the numeric buttons to
switch the TV on.
(4) VCR/TV/DVD switch (VCR/TV/DVD)
(5) Channel up/down buttons (CH
IJ )
≥Selects the required television channel.
(6) TV volume up/down buttons ( r N s, VOLUME)
≥Adjusts the volume of the TV.
VCR/DVD/TV
VCR/
DVD
VCR/DVD REC CHECK REC
CH
VOLUME
TV TV
VCR DVD
1 2 3
7 8 9
0 100
4 5 6
SLOW/SEARCH
NAVI
TOP MENU MENU
RETURN
PROG/CHECK QUICK REPLAY
DISPLAY
JET REW TIMER
ENTER
PLAY
LIST
INDEX/SKIP
Н Н
OUTPUT
TRACKING/V-LOCK
AV
;/D
DIRECT
NAVIGATOR
(1)
(2)
(3)
(4)
(5)
(6)
The remote control
Installing the Batteries
Insert the batteries with the polarity ( + and -) correctly aligned.
Power Source for the Remote Controller:
The remote controller is powered by 2 “AA”, “UM-3” or “R6” size
batteries. The life of the batteries is about one year, although this
depends on the frequency of use.
Precautions for Battery Replacement:
≥Load the new batteries with their polarity (+ and -) aligned
correctly.
≥Do not apply heat to the batteries, or an internal short circuit may
occur.
≥If you do not intend to use the remote controller for a long period
of time, remove the batteries and store them in a cool and dry
place.
≥Remove spent batteries immediately and dispose of them
properly.
≥Do not use an old and a new battery together, and never use an
alkaline battery with a manganese battery.
≥Do not use rechargeable batteries.
Use
Aim at the receiver window, avoiding obstacles, at a maximum
range of 7 m (23 feet) directly in front of the unit.
≥Keep the transmission window and the unit’s sensor free from
dust.
≥Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
R6, AA, UM-3
30
30
20
20
Infra-red remote control receiver window