Panasonic AG-VP300P - Manual (Page 28)

28
Settings Using the On Screen Display
Change the settings to suit your preferences and to suit the unit to
the environment in which it is being used. These settings are
retained in memory until they are changed, even if the unit is
turned off.
Common procedure
Preparations
≥Confirm that the TV is on and the unit viewing channel is
selected.
≥Turn on the unit.
≥Switch [VCR/TV/DVD] to “VCR”.
≥Press [VCR/TV] to select the VCR mode.
Operation
Press [MENU] to show the
VCR MENU.
To Select the Desired Language
Select the language for these menus and other on screen displays.
Operations
While the VCR MENU is displayed
1 Select “LANGUAGE” by pressing [Cursor] 34 and
then press [ENTER].
2 Select the desired
language by pressing
[Cursor]
34.
3 Press [MENU] twice to
make the on screen
display disappear.
Setting the Clock of your unit
The clock is set automatically after Plug in Auto Tuning
(
lpage 15). Do the following if you want to set it again or if the
time is not set correctly.
Operations
While the VCR MENU is displayed
1 Select “CLOCK SET” by pressing [Cursor] 34 and
then press [ENTER].
ª AUTO CLOCK SET
2 Select “AUTO CLOCK
SET” by pressing
[Cursor]
34 and then
press [ENTER].
Auto setting starts. This can take
some time, up to a few hours in
some cases.
≥The time is displayed on the unit’s display when finished.
To stop partway through
Press [MENU].
Note:
≥If the unit couldn’t set the clock automatically, the MANUAL
CLOCK SET screen appears. Set the time manually ( lbelow).
ª MANUAL CLOCK SET
2 Select “MANUAL CLOCK
SET” by pressing
[Cursor]
34 and then
press [ENTER].
3 Press [Cursor] 2 1 to
select the item you want
to change and press [Cursor]
34 to change the
setting.
≥D.S.T. means Daylight Saving Time. If you set to “YES”,
Daylight Saving Time will be activated automatically.
4 Press [MENU] to start the clock and exit the setting
screen.
Note:
≥The clock operates for at least 5 years on its backup system in
the event of a power failure.
Time Reset Function
If the clock is less than two minutes slow or fast, it can easily be
reset to the proper time.
Example: Resetting the clock to 12:00.00
1) Select “CLOCK SET” from the VCR MENU and press [ENTER].
2) Press [Cursor]
34 to select “MANUAL CLOCK SET” and
then press [ENTER].
3) When the current clock display on this unit is between
11:58.00 and 12:01.59, press [MENU] as soon as you hear the
12:00.00 signal. This resets the time to 12:00.00.
VCR/DVD/TV
VCR/DVD REC CHECK REC
CH
VOLUME
TV TV
VCR DVD
1 2 3
7 8 9
0 100
4 5 6
SLOW/SEARCH
NAVI
TOP MENU MENU
RETURN
PROG/CHECK QUICK REPLAY
DISPLAY
JET REW TIMER
ENTER
PLAY
LIST
INDEX/SKIP
OUTPUT
TRACKING/V-LOCK
AV
DIRECT
NAVIGATOR
CANCEL/RESET
MUSIC w/ PICTURE
SEARCH PICTURE SPEED
AUDIO
POSITION MEMORY
VCR/TV
SET UP A-B REPEAT REPEAT PLAY MODE
A.SRD CINEMA
SUBTITLE ANGLE
VCR/TV/DVD
VCR/TV
MENU
VCR/
DVD
3, 4, 2, 1
ENTER
LANGUAGE
CLOCK SET
CHANNEL SET
SELECT
END : , ENTER
:MENU
VCR MENU
≥OPTION
On Screen Display
SELECT
END :
:MENU
LANGUAGE
≥ENGLISH
ESPAÑOL
FRANÇAIS
SELECT
END : , ENTER
:MENU
CLOCK SET
≥AUTO CLOCK SET
MANUAL CLOCK SET
AUTO CLOCK SET
AUTO CLOCK SETTING
IN PROGRESS.
PLEASE WAIT.
CANCEL:MENU
MANUAL CLOCK SET
Y M D H:M
2003 1 1 12:00AM
D. S. T. : YES NO