Panasonic AG-VP300P - Manual (Page 12)

12
Connections
This section shows you how to connect the unit to an antenna, TV, etc.
When the unit is turned on after connecting the antenna cable and the AC power cord, Plug in Auto Tuning and Auto Clock Setting
start automatically.
Basic Connections
The following connections are required to record the video cassette and play back the video cassette and discs through the TV.
Preparation
≥Refer to the television’s operating instructions.
≥Turn the television off and disconnect its AC power supply cord.
Connection to a TV using the Audio/Video Input Sockets
Note:
≥Connect audio/video cables directly to your TV. The video signals on DVDs and videotapes have copyright protection. The video may not be
shown correctly if you connect through an A/V selector or other equipment.
To enjoy sound through other audio equipment
You can output digital signals from this unit’s OPTICAL DIGITAL AUDIO OUT terminal,
enabling you to enjoy the powerful surround effects found on discs recorded with Dolby Digital
or DTS. Connect an amplifier with built-in decoders. See page 47 for connection examples.
R-AUDIO-L VIDEO OPTICAL RF
DIGITAL
AUDIO OUT
(PCM/BITSTREAM)
R-AUDIO-L VIDEO S-VIDEO
IN
OUT
COMPONENT VIDEO OUT (480P/480I)
Y P B P R OUT2
(DVD ONLY) R-AUDIO-L VIDEO
IN
(AV1)
OUT1
(VCR/DVD)
TV Set (Not supplied)
Antenna (Not supplied)
Antenna Input
Connector
To Power Outlet
R-AUDIO-L VIDEO OPTICAL RF
DIGITAL
AUDIO OUT
(PCM/BITSTREAM)
R-AUDIO-L VIDEO S-VIDEO
IN
OUT
COMPONENT
VIDEO OUT (480P/480I)
Y P B P R OUT2
(DVD ONLY) R-AUDIO-L VIDEO
IN
(AV1)
OUT1
(VCR/DVD)
TV Set (Not supplied)
Antenna (Not supplied)
Antenna Input
Connector
To Power Outlet
VIDEO IN AUDIO IN
Audio/video cable
(Not supplied)
OPTICAL
DIGITAL
AUDIO OUT
(PCM/BITSTREAM)
R-AUDIO-L VIDEO S-VIDEO
COMPONENT
VIDEO OUT (480P/480I)
Y P B P R OUT2
(DVD ONLY)