Panasonic AG-VP300P - Manual (Page 32)

32
Playing discs
Basic play
[DVD-V[ [RAM[ [VCD] [CD] [MP3] [WMA]
Preparations
≥To view the video on a DVD or Video CD, turn on the TV and
confirm that the unit viewing channel is selected.
≥Press [VCR/TV] to select the video input mode for this unit.
≥Switch [VCR/TV/DVD] to “DVD”.
≥Press [DVDÍ] to turn on the unit.
≥When “OUT1 [VCR/DVD]” in the VCR MENU “OPTION” is set to
“MANUAL”, press [VCR/DVD OUTPUT] to switch it to disc video.
(
lpage 17)
Operations
1 Press [ < DVD OPEN/CLOSE] to open the disc tray.
2 Place the disc with the label facing upward.
≥Load double-sided discs so
the label for the side you want
to play is facing up.
3 Press [ 1](PLAY) .
≥The disc tray closes and play begins. It is
normal for sound and pictures to take
time to start.
[MP3] [WMA] [CDtext]
Track information appears on the
television. Press [SUBTITLE] to turn the display on or off.
ª When a menu screen appears on the television
[DVD-V[ [VCD]
Press the numeric buttons to select the desired item.
Example: “03”; [3]
“10”; [ S10] l[1]l[0]
≥Play of the selected item now begins.
≥Some discs may take time for the menu screen, video or
audio to be presented.
≥Many Video CDs with playback control display a menu on the
TV when played back. “PBC” is displayed in the unit’s
display.
≥When playing DVDs, you can also use [Cursor]3421 to
select items. Press [ENTER] to confirm your selection.
≥Some discs allow the items to be selected by [: ],
[ 9], etc. The operation differs depending on the disc.
Read the disc’s instructions for further details about
operation.
≥Discs continue to rotate while menus are displayed. Press
[ ∫] when you have finished viewing to preserve the unit’s
motor and your television screen.
To revert to the menu screen
Press [MENU].
For DVDs having two or more menus, the complete menu of the
disc may be displayed by pressing [TOP MENU].
To eject a disc
Press [
<DVD OPEN/CLOSE].
≥The disc tray comes out.
≥You can eject a disc even if the power is turned off.
Notes:
≥When the unit is first turned on and there is a disk loaded, it may
start playing automatically.
≥If “ ”(Prohibit) indication appears on the television, the
operation is prohibited by the unit or disc.
In this case, either of the following marks is displayed:
≥If a disc cannot be played and “U11” appears
in the unit’s display, it is possible that
fingerprints or dust is on the data side of the
disc.
- Clean the data side of the disc with a soft
cloth. ( lpage 6)
- If the disc is not dirty and “U11” is still displayed, the optical pick
lens ¢ may have gotten dirty. In this case, contact your dealer.
¢ Lens built into this unit to read the data on the disc.
VCR/DVD/TV
VCR/DVD REC CHECK REC
CH
VOLUME
TV TV
VCR DVD
1 2 3
7 8 9
0 100
4 5 6
SLOW/SEARCH
NAVI
TOP MENU MENU
RETURN
PROG/CHECK QUICK REPLAY
DISPLAY
JET REW TIMER
ENTER
PLAY
LIST
INDEX/SKIP
OUTPUT
TRACKING/V-LOCK
AV
DIRECT
NAVIGATOR
CANCEL/RESET
MUSIC w/ PICTURE
SEARCH PICTURE SPEED
AUDIO
POSITION MEMORY
VCR/TV
SET UP A-B REPEAT REPEAT PLAY MODE
A.SRD CINEMA
SUBTITLE ANGLE
POSITION
MEMORY
VCR/TV
PROGRESSIVE OUT
MENU
VCR/DVD/TV
VCR/DVD
OUTPUT
TOP MENU
SUBTITLE
VCR/
DVD
STOP PLAY
PROGRESSIVE OUT
REC CHECK MUSIC WITH PICTURE
OPEN/CLOSE DVD
DVD OPEN/CLOSE
DVD
3, 4, 2, 1
ENTER
Numeric
buttons
Display Symbol
MP3/WMA disc
≥It may take a few moments to play a MP3/WMA disc.
≥When playback starts, text-based track information is displayed
on the TV screen.
≥When Track 100 or after is played back on an
MP3/WMA disc having a total of 100 tracks or
more, the display indicates the track number
as shown on the right.
≥In addition to the normal playback, you can
operate the unit from the menu. ( lpage 38)
≥This unit can only play back data recorded in the ISO9660 level
1 format or level 2 format (Except for extended formats).
Operation prohibited
by the disc Operation prohibited
by the unit
e.g. track 103