Planet Technology FGSW-2620VM - Manual (Page 18)

FGSW-2620VM User’s Manual
4.1.1.2 Advanced
Choose Advanced from System Information of Managed Switch, the screen in Figure 4-1-2 appears.
Figure 4-1-2 Switch Advanced setting screenshot
OObject Description
Broadcast Storm Filter Mode Configure broadcast storm control. Enable it and set the upper threshold for
individual ports. The threshold is the percentage of the port's total bandwidth
used by broadcast traffic. When broadcast traffic for a port rises above the
threshold you set, broadcast storm control becomes active. The valid threshold
values are 1/2, 1/4, 1/8, 1/16 and off. Default is “1/4”.
Collision Retry Forever Provide Collision Retry Forever function ”Disable” or ”Enable” on Switch; If
this function is disabled, when a packet meet a collision, the Switch will retry 6
times before discard the packets. Otherwise, the Switch will retry until the
packet is successfully sent.
Default mode is Enable.
MAC Table Auto-Aging Fill in the number of seconds that an inactive MAC address remains in the
switch's address table. The valid threshold values are 150, 300, 600 seconds
and off.
OObject Description
System Name The name of switch.
System Description The description of switch.
System Location The switch physical location.
Kernel Version The kernel software version.
Firmware Version The switch's firmware version.
MAC Address The unique hardware address assigned by manufacturer (default).
Apply button Press the button to complete the configuration.
18