Planet Technology FGSW-2620VM - Manual (Page 65)

FGSW-2620VM User’s Manual
Figure 4-5-4 Access Control List (ACL) Web Page screen
OObject Description
Group id Input a group ID and available range is 1-255.
Action To assign “Permit” or “Deny” for Access Control List.
VLAN To choose VLAN type as “Any” or by “VID (1-4094)”.
Packet Type To choose Packet type as “IPv4” or by “Non-IPv4”.
IP Fragment To decide to “check” or “Uncheck” the IP fragment.
Provide additional L4 protocol for security on Layer 4 level. L4 Protocol
Current List Display “IPv4” or “Non-IPv4” ACL groups, maximum up to 16 groups.
Press this button for add Access Control List group on the Switch. Add button
Del button Press this button for delete Access Control List group on theSwitch.
4.5.3 Static MAC Address
When you add a static MAC address, it remains in the switch's address table, regardless of whether the device is
physically connected to the switch. This saves the switch from having to re-learn a device's MAC address when the
disconnected or powered-off device is active on the network again.
To bind the MAC Address, click on the Security/ Static MAC Address menu button, the main web page then shows the
Static MAC Address function table.
1. Fill the MAC Address field with MAC address in the format “xx-xx-xx-xx-xx-xx “
2. Choose the port to bind the MAC Address in the Port field.
3. Click on the “Add” button.
65