Planet Technology FGSW-2620VM - Manual (Page 54)

FGSW-2620VM User’s Manual
Highest:secHigh:SecLow:Lowest=15:10:5:1
Default mode is Highest:secHigh:SecLow:Lowest=8:4:2:1
Static Port Ingress
Priority
Allow to assign Ingress priority on each port of the Switch, the available options are OFF and
0-7 . Default mode is 0.
802.1p Priority [7-0] Allow assign high and low on each priority, the available options are shown as below:
Lowest, SecLow, SecHigh, Highest.
Press this button for save current QoS configuration of each port on the Switch. Save button
#
Notice:
802.1p Priority: Priority classifiers of the Switch forward packet. COS range is from 0 to 7. Seven
is the high class. Zero is the less class. The user may configure the mapping between COS and
Traffic classifiers.
4.5 Security
In Security page, it has five parts of setting
„ 802.1x/Radius,
„ Access control list,
„ Static MAC address,
„ MAC filter
„ IP security.
We will describe the configure detail in following.
4.5.1 802.1x/Radius
Understanding IEEE 802.1X Port-Based Authentication
The IEEE 802.1X standard defines a client-server-based access control and authentication protocol that restricts
unauthorized clients from connecting to a LAN through publicly accessible ports. The authentication server
authenticates each client connected to a switch port before making available any services offered by the switch or the
LAN.
Until the client is authenticated, 802.1X access control allows only Extensible Authentication Protocol over LAN (EAPOL)
traffic through the port to which the client is connected. After authentication is successful, normal traffic can pass through
the port.
This section includes this conceptual information:
• Device Roles
54