Planet Technology FGSW-2620VM - Manual (Page 57)

FGSW-2620VM User’s Manual
„ Ports in Authorized and Unauthorized States
The switch port state determines whether or not the client is granted access to the network. The port starts in the
unauthorized state. While in this state, the port disallows all ingress and egress traffic except for 802.1X protocol packets.
When a client is successfully authenticated, the port transitions to the authorized state, allowing all traffic for the client to
flow normally.
If a client that does not support 802.1X is connected to an unauthorized 802.1X port, the switch requests the client's
identity. In this situation, the client does not respond to the request, the port remains in the unauthorized state, and the
client is not granted access to the network.
In contrast, when an 802.1X-enabled client connects to a port that is not running the 802.1X protocol, the client initiates
the authentication process by sending the EAPOL-start frame. When no response is received, the client sends the
request for a fixed number of times. Because no response is received, the client begins sending frames as if the port is
in the authorized state
If the client is successfully authenticated (receives an Accept frame from the authentication server), the port state
changes to authorized, and all frames from the authenticated client are allowed through the port. If the authentication
fails, the port remains in the unauthorized state, but authentication can be retried. If the authentication server cannot be
reached, the switch can retransmit the request. If no response is received from the server after the specified number of
attempts, authentication fails, and network access is not granted.
When a client logs off, it sends an EAPOL-logoff message, causing the switch port to transition to the unauthorized
state.
If the link state of a port transitions from up to down, or if an EAPOL-logoff frame is received, the port returns to the
unauthorized state.
4.5.1.1 System Configuration
The section provides 802.1x -System Configuration, the screen in Figure 4-5-1
57