Planet Technology Wireless Access Point w/Bridge WAP-1963A - Manual (Page 18)

13
3.2.6 AP Bridge – WDS Mode
In this mode, WAP-1963A will be a repeater between two AP mode WAP-1963A, that can extend the
connect distance. When it works in this mode, it will also be an access point.
Parameters Description
Alias Name The alias name of this access point.
ESSID The ESSID (up to 31 printable ASCII characters) is the unique name identified in a
WLAN. The ID prevents the unintentional merging of two co-located WLANs.
Please make sure that the ESSID of all stations in the same WLAN network are the
same. The default ESSID is “default”.
Channel Number Select the appropriate channel from the list provided to correspond with your
network settings.
Associated Clients When you press the “Show Active Clients” button, you can see a dialog box to show
you the clients that connect to this WAP-1963A. Please refer to the section 3.1.2.1
to know the detail of the dialog box.