Planet Technology Wireless Access Point w/Bridge WAP-1963A User Manual
Page 23
18
ASCII Characters: guest
Hexadecimal Digits: 12345abcde
Default Tx Key
Select one of the four keys to encrypt your data. Only the key you select it in the
“Default key” will take effect.
Key 1 - Key 4
The WEP keys are used to encrypt data transmitted in the wireless network. Fill the
text box by following the rules below.
64-bit WEP: input 10-digit Hex values (in the
“A-F”, “a-f” and “0-9” range) or 5-digit
ASCII character as the encryption keys.
128-bit WEP: input 26-digit Hex values (in the
“A-F”, “a-f” and “0-9” range) or
10-digit ASCII characters as the encryption keys.
3.4.2 802.1x
IEEE 802.1x is an authentication protocol. Every user must use a valid account to login to this Access
Point before accessing the wireless LAN. The authentication is processed by a RADIUS server. You
can use an external RADIUS server or use the RADIUS server built-in with the Access Point. This
mode only authenticates user by IEEE 802.1x, but it does not encryption the data during
communication.
Parameters
Description