Planet Technology Wireless Access Point w/Bridge WAP-1963A - Manual (Page 34)

29
3.8 Configuration Tool
The Configuration Tool screen allows you to backup, restore and reset WAP-1963A configuration
settings. Saving the configuration settings provides an added protection and convenience should
problems occur with the WAP-1963A and you have to reset to factory default. When you save the
configuration setting (Backup) you can re-load the saved configuration into the Access Point through
the Restore selection. If extreme problems occur you can use the Restore to Factory Default
function, this will set all configurations to its original default settings.
Parameter Description
Backup Settings Please click “Save…” button. That will save the Access Point’s current
configuration to a file named "config.bin" on your PC.
Restore Settings Please click “Browse…” to find out the config.bin, and then click “Upload” to
restore the saved configuration to the Access Point.
Restore to Factory Click “Reset”. This function will restore WAP-1963A to original factory settings.