Planet Technology Wireless Access Point w/Bridge WAP-1963A - Manual (Page 33)

28
Point. The default password for the Access Point is admin. Note that the
password is case-sensitive.
New Password Enter the password (up to 15-digit alphanumeric string) you want to login to
the Access Point. Note that the password is case-sensitive.
Re-Enter Password Reconfirm the password (up to 15-digit alphanumeric string) you want to
login to the Access Point. Note that the password is case-sensitive.
Management IP
IP Address Designate the Access Point ’s IP Address. This IP Address should be unique
in your network. The default IP Address is 192.168.0.1.
Subnet Mask Specify a Subnet Mask for your LAN segment. The Subnet Mask of the
Access Point is fixed and the value is 255.255.255.0.
DHCP Server Enable or disable the DHCP Server.
DHCP Server
Default Gateway IP Specify the gateway IP in your network. This IP address should be different
from the Management IP.
Domain Name Server IP This is the ISP ’s DNS server IP address that they gave you; or you can
specify your own preferred DNS server IP address.
Start IP/End IP You can designate a particular IP address range for your DHCP server to
issue IP addresses to your LAN Clients. By default the IP range is from: Start
IP 192.168.0.100 to End IP 192.168.0.200.
Domain Name You can specify the Domain Name for your Access Point.
Lease Time The DHCP Server when enabled will temporarily give your LAN client an IP
address. In the Lease Time setting you can specify the time period that the
DHCP Server lends an IP address to your LAN clients. The DHCP Server
will change your LAN client ’s IP address when this time threshold period is
reached.