Planet Technology ICA-106 - Manual (Page 10)

Ethernet
Cable
4. Connect the external power supply to Network Camera
Connect the external power supply to the DC power jack of the Network Camera. Note :
Use the power adapter, 5VDC, included in the package and connect it to wall outlet for
AC power.
Power
Cable
Once you have installed the Network Camera well and powered on, the status LED will
turn green first and then orange. It means the system is booting up successfully.
Furthermore, if you have a proper network connection, and access to the Network
Camera, the 10/100M LAN LED will flash green
10/60