Planet Technology ICA-106 - Manual (Page 33)

• 176x144
• 160x120
• 320x240
• 640x480
- Power line frequency:
User should choose either 50 or 60 Hz to meet the power line frequency in your
country.
- Quality:
There are two modes of video quality. User can adjust the video quality by
either bit-rare control or compression ratio:
• Bit-rate control: from 32kbps to 1024kbps
• Compression ratio:
High: Video is better but frame rate may be slower
Low: Video is poor but frame rate may be higher
Normal: System default value.
- Video Output:
The Network Camera supports four kind of video standard. User can choose
one of them to fit to the local video standard.
- Message Display:
You may choose the message that you want to display on the output video.
- Video Type:
The Network Camera supports two kind of video compression mode: MPEG4 or
JPEG. User can choose one of the two compression mode based on
requirement.
- Audio:
The Network Camera supports ADPCM for audio compression.
- Video Enable:
Enable this option will allow stream video to remote clients. Otherwise, the
Network Camera will not stream video out.
- IR:
User can turn on or off the built-in IR LED. This function is very useful under low
illumination environment.
Adjustment:
- Max Frame Rate:
User can set the desired max frame rate to match the limitation of bandwidth or
other requirement.
- Exposure:
Auto: will adjust the internal gain automatically.
33/60