Planet Technology ICA-106 - Manual (Page 11)

Chapter3 Login to Homepage
3.1 Before Operation
Install the IP Address of Network Camera
When you installed your Network camera on your LAN environment, you may execute
“MP4 IP Finder.exe” to discover Network camera’s IP address.
“MP4 IP Finder.exe” is used to scan the Installed Network Camera on a LAN, setting the
Network Camera Name, IP address settings and so on.
Using your mouse to select any one of the Network Cameras within your LAN
environment, you can search out its IP address and other IP parameters as follows:
1. Edit the IP address of this Network Camera.
2. Edit the Gateway Address if necessary.
3. Edit the Network Mask if necessary.
4. ‘Submit’ it.
11/60