PYLE Audio IKON RUGGED 7505-BTSDCMHC25 - Manual (Page 143)

Chapter 5: Configuration
Advanced Services Settings
Ikôn Rugged PDA (Windows CE 5.0) User Manual 131
Modem Logging
When this option is enabled, the Ikôn logs AT commands (e.g., dial-out information, pass-
word string, etc.) that the administrator can monitor for debugging purposes. Modem
commands are stored in: \MdmLog.txt.
Radio Power Management
When this option is enabled, access points that support it will use Radio Power Management
guidelines to control the client (Ikôn) radio. Access points determine how often the Ikôn
radio enters sleep mode when no activity is detected to reduce power consumption on the
client side. Another benefit is that when Radio Power Management is enabled, even when
no activity is detected, the access point does not disassociate the Ikôn (client).
5.8.2 Advanced Services Settings
FTP Server
This option is enabled by default to allow file transfers. Keep in mind that data transfer in
either direction is restricted to the Temp folder—that is, data are always loaded from the
FTP Server to the Temp folder and from the Temp folder to the FTP Server.
If this option is disabled, a warm reset must be performed to accept the change.
SNTP (Simple Network Time Protocol) Server
The SNTP Server Name typed in this dialog box is used to synchronize Ikôn time with the
time server time. A warm reset must be performed once the server name as been entered.