B.1.3.2 error states – PYLE Audio IKON RUGGED 7505-BTSDCMHC25 User Manual

Page 287

Advertising
background image

Appendix B: Wireless Wide Area Network (WWAN)

Advanced Information

Ikôn Rugged PDA (Windows CE 5.0) User Manual

B-7

Ready to connect.

If the modem loses the connection to the GSM network, the following states are repeated:
Searching for network, Registered on network, Searching for packet data, and Ready
to connect
.

B.1.3.2 Error States

The following temporary error states (i.e., these states may disappear without interaction)
may be displayed:

Emergency calls only.
The modem has found a network but is not allowed to register (e.g. no roaming agree-
ment between networks). The modem keeps searching for another network.

No network found.
A network is not currently available. The modem continues searching for a network.

Packet data not available.
The current network does not support a packet data service.

Packet data not allowed.
The modem is not allowed to use the packet data service on the current network (e.g. no
GPRS roaming agreement between network; a roaming agreement for voice may still be
in place). It is also possible that you do not have a subscription for GPRS at all.

The remaining error states are permanent:

SIM is missing.
The SIM card is missing. After the SIM has been inserted a warm boot may be required.

SIM failure.
The SIM card is permanently disabled (e.g. because the wrong PUK has been entered
too many times). A new SIM is needed.

Modem failure.
The modem did not respond to commands as expected. If a warm boot does not clear
this condition, the modem may need to be replaced.

NDIS error.
An internal software error has occurred. If a warm boot does not clear this condition,
Psion Teklogix technical support may need to investigate further.

Advertising