Driver installation, Cd install – Pentax PocketJet 3 User Manual
Page 18
text. What you will see is WYSIWYG – what you see is what
you get – meaning that what is on your computer screen is
what is printed.
In Text Mode, the PocketJet will print only the characters
contained in the resident character set. For the PocketJet 3 and
PocketJet 3 Plus, this character set is the Epson® ESC/P
emulation in native serif and sans serif fonts in 10, 12, 15, and
proportional sizes.
Please take time to fill out the warranty registration information
before installing any drivers to assist with technical support, should
you need it.
Driver Installation
CAUTION:
Please do NOT connect your PocketJet printer to your
computer via the USB cable UNTIL you have performed the
driver installation. If you accidentally do so, cancel the “New
Hardware Wizard”, disconnect the printer, and begin the
driver installation described below.
For most printer applications, your printer requires software drivers
to communicate with your computer. A CD with drivers and
installation information is provided with your PocketJet kit. The
newest information and drivers are available from the Pentax web
site,
Accessories.” The supplied CD and the website both list the latest
driver version numbers. If the website version is newer (with a
higher version number), we recommend that you install the website
version.
CD Install
1. If you are installing PDA software, connect your PDA to your PC
now (PDA means a WinCE, PocketPC, Palm OS, or Symbian OS
device).
2. Insert the CD in your PC’s CD drive.
3. Select “Installation,” select your printer type, and click
“Continue.”
4. Complete the Registration Information.
5. Select ALL operating systems you wish to install drivers for, and
then click “Continue.” Note: Your Windows operating system
will be selected by default.
Page 8