Pentax PocketJet 3 - Manual (Page 74)

Custom
4.13” (105mm) x 1.00” (25.4mm) minimum
8.6” (218.5mm) x 27 feet (8.23 m) (at 200
dpi) max.
8.6” (218.5mm) x 18 feet (5.49 m) (at 300
dpi) max.
(14” (355.6 mm) maximum length
recommended)
Paper Type
Thermal—Cut Sheet, Roll Paper,
Perforated Roll, or Fanfold Paper
Paper Loading
Manual—Single Sheet or Roll
Form Feed Modes
No Feed Mode
Fixed Page Mode
End of Page Mode
Interfaces
USB Printer: USB “Mini-B”
(Using USB 1.1 “High Speed”)
Host: USB “A”
IrDA
Tiny TP extension to IrLMP, IrCOMM
(COM port emulation using 3 wire “cooked”
serial mode [IrLPT]), and IrOBEX, vCard,
vCal and vMSG (text portions only).
Bluetooth
2402~2480MHz ISM band, 79 x 1MHz,
Class 1, Bluetooth Level 1.2, SPP
Protocol, Pairing/PIN supported.
Factory default = PIN disabled.
Serial
Asynchronous, 8* bits, 1* stop bit,
300/1200/2400/9600*/19200/38400/
57600/115200 baud, Hardware*
(RTS/CTS) / Software (Xon/Xoff) flow
control, 1/8" 4 conductor jack.
*Factory Defaults
Environmental
Temperature Operating: 14º to 113º F (-10º to 45º C)
Note: Operation at low temperatures may
slow the printer or cause it not to print at all.
Storage: 5º to 122º F (-15º to +50º C)
Page 64