Pentax OPTIO A40 - Manual (Page 117)

115
4
Tak
ing Pi
cture
s
You can assign one of the following functions to the Green button;
[Green Mode] (p.59), [Face Priority] (p.112), [D-Range Comp.] (p.113),
[Shake Reduction] (p.57), and [Fn Setting] (p.116). You can activate the
assigned function by just pressing the Green button.
1
Press the MENU button in Capture mode.
The [A Rec.Mode] menu appears.
2
Press the four-way controller
(23) to select [Green Button].
3
Press the four-way controller (5).
The Green button setting screen appears.
4
Use the four-way controller (23)
to select the function you want to
register.
5
Press the shutter release button
halfway.
The camera is ready for taking pictures.
Setting the Green Button
Assigning a Function (Green Mode/Face Priority/D-Range Comp./
Shake Reduction)
Green Mode is registered as the default setting.
Rec. Mode
MENU Exit
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
AWB
12 M
AUTO 800
MENU
Shutter release
button
MENU button
Four-way
controller
Rec. Mode
MENU Exit
Sharpness
Memory
One push PF
D-Range Comp. Off
Saturation
Green Button
Green Button
MENU Cancel OK OK
Face Priority
D-Range Comp.
Shake Reduction
Fn Setting
Green Mode