Pentax OPTIO A40 - Manual (Page 125)

123
4
Tak
ing Pi
cture
s
1
Press the MENU button in Capture mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23)
to select [Memory].
3
Press the four-way controller (5).
The menu items screen appears.
4
Use the four-way controller (23)
to select an item.
5
Use the four-way controller (45)
to select [O (On)/P (Off)].
6
Press the shutter release button
halfway.
The camera is ready for taking pictures.
• The current zoom position in Intelligent Zoom or Digital Zoom will
not be saved even if you set Zoom Position to On in Memory. Only
the current zoom position in the optical zoom can be saved.
• Even if you set Sensitivity to Off in Memory, the selected range for
ISO Correction in AUTO is saved when the camera is turned off.
• When “File #” is set to On, the file number of the last image taken
will be saved, and the file number will continue even after inserting
a new SD Memory card. Also, the file number will continue even
after inserting an SD Memory card with images already recorded
on it.
• When “File #” is set to Off, the file number of the image will start
from the lowest number each time a new SD Memory card is
inserted. The file number will continue after an SD Memory card
with images already recorded on it.
Rec. Mode
MENU Exit
Sharpness
Memory
One push PF
D-Range Comp. Off
Saturation
Green Button
Memory
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
White Balance
MENU Cancel OK OK