Using the self-timer, P.83), 1p.83 t – Pentax OPTIO A40 User Manual

Page 85

Advertising
background image

83

4

Tak

ing Pi

cture

s

In self-timer mode, the picture is taken ten seconds or two seconds after

the shutter release button is pressed.

1

Press the four-way controller (2) in Capture mode.

2

Press the four-way controller

(45) to select g (Self-timer) or

(2 sec. Self-timer).

3

Press the OK button.

The camera is ready for taking pictures using
the Self-timer.

4

Press the shutter release button halfway.

The focus frame on the LCD monitor will light green when the camera
is in focus.

5

Press the shutter release button fully.

The self-timer starts running.
g

(Self-timer)

: The picture is taken after the self-timer lamp

lights for about seven seconds, then blinks for
about three seconds.

(2 sec. Self-timer): The picture is taken after the self-timer lamp

blinks for about two seconds.

Using the Self-timer

Focusing may be compromised if you move the camera while the
self-timer is running.
• The countdown appears on the LCD monitor when you press the

shutter release button.

• If you press the shutter release button halfway during a

countdown, the countdown stops. Press the shutter release button
fully to restart the countdown.

Troubleshooting “Subject is not in focus” 1p.200

Shutter release button

Four-way controller

OK button

OK

OK

OK

OK

Drive Mode

Drive Mode

Self-timer

Self-timer

Drive Mode

Self-timer

MENU

Cancel

Cancel

Advertising