Connecting network and power source, Connecting network and power source –4 – PYLE Audio SOUNDPOINT IP 33X User Manual
Page 12
User Guide for the SoundPoint IP 32x/33x Desktop Phone
1 - 4
Connecting Network and Power Source
Use Power over Ethernet (PoE) for network and power source connections
unless otherwise directed by your system administrator.
Power over Ethernet
Using a regular CAT5 cable (optional accessory from Polycom), the phone can
be powered from a PoE (IEEE 802.3af) compliant switch or hub.
To connect using a PoE source:
• Plug the supplied network cable between the LAN jack on the phone and
an available power and data port on the in-line power switch.
Note
The AC power adapter is a separate, optional accessory. Your system administrator
will provide one if necessary.
Power Adapter
(Optional Accessory)
IEEE802.3af compliant PoE
Hub/Switch/Midspan Unit
Optional PC Port
(SoundPoint IP 33x Only)
Note
The SoundPoint IP 33x phones have an optional PC connection. The SoundPoint
IP 32x phones do not.
If you want to use the optional PC connection on the SoundPoint IP 33x, a separate
ferrite clamp (not included) is required. Contact your system administrator.