PYLE Audio SOUNDPOINT IP 33X - Manual (Page 27)

Customizing Your SoundPoint IP 32x/33x Phone
2 - 5
3. Select Backlight On Intensity.
4. Use or to select high, medium, low, or off, and then press the
Select soft key.
The default level is High.
5. Select Backlight Idle Intensity.
6. Use or to select high, medium, low, or off, and then press the
Select soft key.
The default level is low.
7. Select Maximum Intensity.
8. Press the Up or Down soft keys to increase or decrease the backlight
intensity.
9. Press the Ok or Cancel soft keys to accept or cancel changes.
10. Press to return to the idle display.