PYLE Audio SOUNDPOINT IP 33X - Manual (Page 28)

User Guide for the SoundPoint IP 32x/33x Desktop Phone
2 - 6
Headset Memory Mode
This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
1. Press .
2. Select Settings > Basic > Preferences > Headset > Headset Memory.
3. Use the or to select Enabled.
4. Press to confirm your choice.
5. Press or repeatedly to return to the idle display.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
To activate Headset Memory Mode:
>> Press twice.
Pressing or Answer soft key to receive a call will now connect to
the your headset automatically.
Electronic Hookswitch
This feature enables electronic hookswitch support.
To select a headset that supports electronic hookswitch:
1. Press .
2. Select Settings > Basic > Preferences > Headset > Analog Headset
Mode.
For information on supported headsets to provide electronic hookswitch features for
placing, answering, and ending calls, go to
www.polycom.com/support/voice and
enter “Headset Compatibility List” in the Knowledge Base text box or contact your
system administrator.