Panasonic KX-FP343AL - Manual (Page 28)

4. Fax
26
Fax auto redial
If the line is busy or if there is no answer, the unit
will automatically redial the number up to 2
times.
L To cancel redialling, press {STOP}.
If your unit does not send a fax
L Confirm the stored telephone number on the
display and check that the number dialled is
answered by the other party’s machine.
L The connecting tone will be heard during
dialling to tell you the status of the other
party’s machine (feature #76, page 39).
4.4 Broadcast
transmission
By programming entries from the one-touch dial
and navigator directory (page 20) into the
broadcast memory, you can send the same
document to multiple parties (up to 20). Your
programmed entries will remain in the broadcast
memory, allowing frequent re-use. See page 27
for broadcast transmission instructions.
L Keep the front cover page open for button
locations.
L The broadcast function utilises station 1. The
one-touch dial function will be cancelled.
L The broadcast key can accept one-touch dial
and navigator entries.
4.4.1 Programming entries into
the broadcast memory
1 Press {MENU} repeatedly to display
“DIRECTORY SET”.
2 Press {BROADCAST}.
3 Press {A} or {B} repeatedly to display the
following.
STATION 1
BROADCAST
[
±]
b
STATION 1
STORE:PRESS SET
4 Press {SET}.
5 Program entries.
Using stations 2–5:
Press the desired station key.
Using stations 6–10:
Press {LOWER}, then press the desired
station key.
Using navigator directory:
Press {A} or {B} repeatedly to display the
desired entry and press {SET}.
6 Press {SET} after programming all of the
desired entries.
7 Press {STOP}.
Note:
L If you program the wrong entry, press
{
STOP} after step 5 to erase the entry.
L Confirm the stored entries by printing a
broadcast programming list (page 49).
4.4.2 Adding a new entry into the
broadcast memory
After initial programming, you can add new
entries (up to a combined total of 20).
1 Press {>}.
2 Press {A} or {B} repeatedly to display
“<BROADCAST>”.
3 Press {MENU}.
4 Press {*} to select “ADD”.
5 Press {A} or {B} repeatedly to display the
desired entry you want to add.
6 Press {SET}.
L To add other entries, repeat steps 5 and 6
(up to 20 entries).
7 Press {STOP}.
4.4.3 Erasing a stored entry from
the broadcast memory
1 Press {>}.
2 Press {A} or {B} repeatedly to display
“<BROADCAST>”.
3 Press {MENU}.
4 Press {#} to select “DELETE”.
5 Press {A} or {B} repeatedly to display the
desired entry you want to erase.
L To cancel erasing, press {STOP}.
6 Press {SET}.
FP343AL.book Page 26 Tuesday, August 5, 2003 3:20 PM