Panasonic KX-FP343AL - Manual (Page 45)

8. Help
43
Program the proper rate in feature #36 (page
38).
L The other party placed the document in their
fax machine the wrong way. Check with the
other party.
A white line or a smudge appears on your
recording paper.
L The glass or rollers are dirty. Clean them
(page 46).
The printing quality is poor.
Please do not reuse the ink film!
Please use genuine Panasonic replacement
film. Refer to page 9 for further details.
L The other party sent a faint document. Ask
them to send a clearer copy of the document.
L The thermal head is dirty. Clean it (page 47).
L Some paper has instructions recommending
which side to print on. Try turning the paper
over.
L You may have used paper with a cotton
and/or fibre content that is over 20%, such as
letterhead or resume paper.
The other party complains that they cannot
send a document.
L The unit is not in FAX ONLY mode. Press
{
RECEIVE MODE} repeatedly until FAX
ONLY mode is displayed.
L The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 13)
or clear the jammed paper (page 44).
I cannot select the desired receiving mode.
L If you want to set FAX ONLY mode, press
{
RECEIVE MODE} repeatedly until FAX
ONLY mode is displayed.
L If you want to set TEL mode, press
{
RECEIVE MODE} repeatedly until TEL
mode is displayed.
L The Distinctive Ring of feature #31 is
activated (page 33).
8.3.4 Copying
The unit will not make a copy.
L You cannot make a copy during
programming. Make the copy after
programming.
L You cannot make a copy during telephone
conversation.
A black line, a white line or smudge appears
on the copied document.
L The glass or rollers are dirty. Clean them
(page 46).
The copied image is distorted.
L The thermal head is dirty. Clean it (page 47).
The printing quality is poor.
Please do not reuse the ink film!
Please use genuine Panasonic replacement
film. Refer to page 9 for further details.
L Some paper has instructions recommending
which side to print on. Try turning the paper
over.
L You may have used paper with a cotton
and/or fibre content that is over 20%, such as
letterhead or resume paper.
8.3.5 If a power failure occurs
L The unit will not function.
L The unit is not designed for making
emergency telephone calls when the power
fails. Alternative arrangements should be
made for access to emergency services.
L Fax transmission and reception will be
interrupted.
L If delayed transmission (feature #25, page
37) is programmed and the start time is
passed during a power failure, transmission
will be attempted soon after power is
restored.
L If any fax documents are stored in the
memory, they will be lost. When power is
restored, a power down report will be printed
out stating which contents in the memory
have been erased.
L Panasonic Australia operates a toll free
Customer Care Centre. Please call
132600 for assistance.
or visit the website www.panasonic
<http://www.panasonic.com.au>
A B C
Original Copy
FP343AL.book Page 43 Tuesday, August 5, 2003 3:20 PM