Pioneer FH-P6200 - Manual (Page 28)

Introduction of audio
adjustments
2 1
3
1 SW indicator
Shows when the subwoofer output is turned
on.
2 LOUD indicator
Appears in the display when loudness is
turned on.
3 Audio display
Shows the audio adjustments status.
% Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FADER (balance adjustment)LOUD (loud-
ness)SUB.W (subwoofer)80Hz (subwoo-
fer setting)SLP (subwoofer slope)F-HPF
(front high pass filter)R-HPF (rear high pass
filter)
# When the RCA output setting is RCA :NON,
SUB.W, 80Hz and SLP change to NonFAD (non
fading) function.
# When the front high pass filter is turned on,
you can select F-SLP (front high pass filter slope).
# When the rear high pass filter is turned on,
you can select R-SLP (rear high pass filter slope).
# To return to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FADER.
Press AUDIO until FADER appears in the dis-
play.
# If the balance setting has been previously ad-
justed, BAL will be displayed.
2 Press a or b to adjust front/rear speak-
er balance.
Each press of a or b moves the front/rear
speaker balance towards the front or the rear.
FADER :F25  FADER :R25 is displayed as the
front/rear speaker balance moves from front to
rear.
# FADER : 0 is the proper setting when only two
speakers are used.
3 Press c or d to adjust left/right speaker
balance.
When you press c or d, BAL: 0 is displayed.
Each press of c or d moves the left/right
speaker balance towards the left or the right.
BAL:L25  BAL:R25 is displayed as the left/
right speaker balance moves from left to
right.
Audio Adjustments
En
28
Section
08