Setting the am tuning step, Switching the auxiliary setting, Switching the dimmer setting – Pioneer FH-P6200 User Manual

Page 37: Switching the rca output setting, Initial settings

Advertising
background image

lected FM tuning step will appear in the dis-

play.

Note

If seek tuning is performed in 50 kHz steps, sta-
tions may be tuned in imprecisely. Tune in the sta-
tions with manual tuning or use seek tuning
again.

Setting the AM tuning step

The AM tuning step can be switched between

9 kHz, the preset step, and 10 kHz. When

using the tuner in North, Central or South

America, reset the tuning step from 9 kHz (531

 1,602 kHz allowable) to 10 kHz (530  1,640

kHz allowable).

1 Press FUNCTION to select AM STEP.

Press FUNCTION repeatedly until AM STEP

appears in the display.

2 Press c or d to select the AM tuning

step.

Pressing c or d will switch the AM tuning

step between 9 kHz and 10 kHz. The selected

AM tuning step will appear in the display.

Switching the auxiliary setting

It is possible to use auxiliary equipment with

this unit. Activate the auxiliary setting when

using auxiliary equipment connected to this

unit.

1 Press FUNCTION to select AUX.

Press FUNCTION repeatedly until AUX ap-

pears in the display.

2 Press a or b to turn AUX on or off.

Pressing a or b will turn AUX on or off and

that status will be displayed (e.g.,

AUX :ON).

Switching the dimmer setting

To prevent the display from being too bright at

night, the display is automatically dimmed

when the cars headlights are turned on. You

can switch dimmer on or off.

1 Press FUNCTION to select DIMMER.

Press FUNCTION repeatedly until DIMMER

appears in the display.

2 Press a or b to turn DIMMER on or off.

Pressing a or b will turn DIMMER on or off

and that status will be displayed (e.g.,

DIMMER :ON).

Note

When you select Custom display color (refer to
Switching the display color on page 39), the dim-
mer is not effective.

Switching the RCA output

setting

This units RCA output can be used for sub-

woofer. You can select whether to use the sub-

woofer control (low pass filter) built-in

RCA :S/W or the auxiliary RCA :NON.

1 Press FUNCTION to select RCA.

Press FUNCTION repeatedly until RCA ap-

pears in the display.

Initial Settings

En

37

English

Section

10

Advertising