Pioneer FH-P6200 - Manual (Page 31)

1 Press AUDIO to select non fading out-
put setting.
Press AUDIO until NonFAD : 0 appears in the
display.
2 Press a or b to adjust the level of the
non fading output.
Each press of a or b increases or decreases
the level of the non fading. +6  24 is dis-
played as the level is increased or
decreased.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the volume level of
the FM tuner, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO and hold until SLA ap-
pears in the display.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
3 Press a or b to adjust the source vo-
lume.
Each press of a or b increases or decreases
the source volume.
SLA :+4  SLA :4 is displayed as the source
volume is increased or decreased.
Notes
! If you do not operate the SLA function within
about 30 seconds, the display is automatically
returned to the source display.
! Since the FM tuner volume is the control, it is
not possible to apply source level adjustments
to the FM tuner.
! The AM tuner volume level can also be ad-
justed with source level adjustments.
! The built-in CD player and the multi-CD player
are set to the same source level adjustment
volume automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Audio Adjustments
En
31
English
Section
08