Pioneer FH-P6200 - Manual (Page 35)

Button DisplayIndicator Position
a FRONT Front seats
b ALL All seats
c FRONT-L Front seat left
d FRONT-R
Front seat
right
1 Press DSP to select the position selec-
tor.
Press DSP until POSI appears in the display.
# If the position selector has been previously set
to a listening position then the title of that pre-
viously selected listening position will be dis-
played instead of POSI.
2 Press c/d/a/b to select a listening po-
sition.
Press one of these, c/d/a/b, to select a lis-
tening position as listed in the table.
# To cancel the selected listening position,
press the same button again.
Using automatic sound
levelizer
During driving, noise in the car changes ac-
cording to the driving speed and road condi-
tions. The automatic sound levelizer (ASL)
monitors such varying noise and automati-
cally increases the volume level, if this noise
becomes greater. The sensitivity (variation of
volume level to noise level) of ASL can be set
to one of five levels.
1 Press DSP to select ASL.
Press DSP until ASL appears in the display.
2 Press a to turn ASLon.
ASL: MID appears in the display.
# To turn ASL off, press b.
3 Press c or d to select the desired ASL
level.
Each press of c or d selects ASL level in the
following order:
LOW (low)MID-L (mid-low)MID (mid)
MID-H (mid-high)HIGH (high)
Digital Signal Processor
En
35
English
Section
09