Pioneer DVR-230-S - Manual (Page 32)

Playback 05
32
En
Switching audio channels
For VR mode content recorded with bilingual audio, you
can switch between left (
L ) channel, right ( R ) channel, or
both ( L+R ).
When playing Video CDs and audio CDs you can switch
between stereo, just the left channel or just the right
channel.
1 To display/switch the audio channel, press
AUDIO repeatedly.
The audio channel(s) currently playing are indicated on-
screen.
• L+R – Both channels (default)
• L – Left channel only
• R – Right channel only
• Stereo – Stereo (default)
• 1/L – Left channel only
• 2/R – Right channel only
Note
• When playing a Bilingual recording on a VR mode
disc, if you are listening to the Dolby Digital
soundtrack via the digital output, you cannot switch
the audio channel. Set
Dolby Digital to Dolby
Digital -> PCM (see Audio Out on page 53) or listen
via the analog outputs if you need to switch the audio
channel.
Switching camera angles
Some DVD-Video discs feature scenes shot from two or
more angles—check the disc box for details: it should be
marked with a
icon if it contains multi-angle scenes.
When a multi-angle scene is playing, the same icon
appears on screen to let you know that other angles are
available.
• To switch the camera angle, press ANGLE.
• The angle number is displayed on-screen.
• If the disc was paused, playback starts again with the
new angle.
Note
• You can also change the angle from some DVD-Video
disc menus. Press TOP MENU to access.
VR mode CD Video CD MP3
AUDIO
VR mode
CD Video CD MP3
DVD-Video
ANGLE
DVR-230_YP.book Page 32 Monday, July 4, 2005 5:20 PM