Additional information 09, Hints on installation, Moving the recorder – Pioneer DVR-230-S User Manual

Page 66: Resetting the recorder, Glossary

Advertising
background image

Additional information

09

66

En

Hints on installation

We want you to enjoy using this unit for years to come, so
please bear in mind the following points when choosing
a suitable location for it:

do...

Use in a well-ventilated room.

Place on a solid, flat, level surface, such as a table,

shelf or stereo rack.

don’t...

Use in a place exposed to high temperatures or

humidity, including near radiators and other heat-
generating appliances.

Place on a window sill or other place where the

recorder will be exposed to direct sunlight.

Use in a dusty or damp environment or in a room

where it will be exposed to excessive cigarette smoke.

Place directly on top of an amplifier, or other

component in your stereo system that becomes hot in
use.

Use near a television or monitor as you may

experience interference—especially if the television uses
an indoor antenna.

Use in a kitchen or other room where the recorder

may be exposed to smoke or steam.

Use on a thick rug or carpet, or cover with cloth—this

may prevent proper cooling of the unit.

Place on an unstable surface, or one that is not large

enough to support all four of the unit’s feet.

Moving the recorder

If you need to move the recorder, first remove the disc, if
there’s one loaded, and close the disc tray. Next, press

STANDBY/ON

to switch the power to standby, checking

that the

OFF

indication in the display goes off. Lastly,

disconnect the power cord. Never lift or move the unit
during playback or recording—discs rotate at a high
speed and may be damaged.

Resetting the recorder

If you need to, you can reset the recorder to all its factory
settings.

1

Make sure that the recorder is on.

2

Press and hold

and press

STANDBY/ON.

The recorder turns off with all settings reset.

Glossary

Analog audio

An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See
also

digital audio

.

Aspect ratio

The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the screen is
almost square); widescreen models are 16:9 (the screen
is almost twice as wide as it is high).

Chapter

Just as a book is split up into several chapters, a title on
a DVD disc is usually divided into chapters. See also

Title

.

Digital audio

An indirect representation of sound by numbers. during
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-to-
digital converter, generating a stream of numbers. On
playback, a digital-to-analog converter generates an
analog signal based on these numbers. See also

Sampling frequency

and

Analog audio

.

Dolby Digital

Dolby® Digital Recording enables consumers to record
high-quality video with stereo sound on recordable DVD
discs. The technology, when utilized instead of PCM
recording, also saves recordable disc space, allowing for
higher video resolution or extended recording time on
each DVD. DVDs created using Dolby Digital Recording
will play back on all DVD-Video players.

Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.

DTS

DTS stands for Digital Theater System. DTS is a surround
system different from Dolby Digital that has become a
popular surround sound format for movies.

“DTS” and “DTS Digital Out” are registered trademarks of
digital Theater Systems, Inc.

DVR-230_YP.book Page 66 Monday, July 4, 2005 5:20 PM

Advertising