Pioneer DVR-230-S - Manual (Page 38)

Recording 06
38
En
Programming a new end time
1 During timer recording, press TIMER REC to
display the Timer Recording screen.
You can also access the Timer Recording screen from
the Home Menu (press
HOME MENU , select Timer
Recording , then Timer Rec (View) ).
2 Use the button to highlight the current timer
recording, then press ENTER.
A screen showing details of the timer recording appears.
From this screen, only the recording stop time can be
changed.
3 Set a new Stop time for the timer recording.
Use the / buttons to select the hour or minute field,
then use the / buttons to change the time.
4 Press ENTER to set the new time and exit the
screen.
Recording will continue until the new stop time is
reached.
Canceling and stopping a timer recording in
progress
After a timer recording has started, you can cancel the
program (but continue recording), or stop recording
completely if you need to.
1 During timer recording, press and hold ì REC for
three seconds.
Only the program is canceled (the timer indicator
disappears); recording continues so that you can
manually stop recording whenever you like.
2 When you want to stop recording completely,
press .
Preventing use of the recorder before a
timer recording (child lock)
You can make all the front panel and remote control
buttons inoperative using the child lock feature. This is
useful when you set a timer recording and want to make
sure that the timer settings are not changed before
recording has finished.
1 If the recorder is on, switch it into standby.
2 Press and hold on the front panel for three
seconds to lock the controls.
The front panel display briefly shows LOCK . If any buttons
are pressed on the remote or front panel, LOCK is briefly
displayed again.
• To unlock the recorder, press and hold on the front
panel for three seconds until the display shows OK .
• To cancel a timer recording when the recorder is
locked, first unlock the recorder (see above), then
press and hold
ì REC for three seconds.
Timer recording FAQ
Frequently Asked Questions
• Even though the timer is set, the recorder d oesn’t start
recording!
Check that the disc loaded is recordable, not locked
(see
Lock Disc on page 50), and that there are fewer
than 99 titles already on the DVD.
• The recorder won’t let me enter a timer program! Why
not?
You can’t enter a timer program if the clock isn’t set.
• What happens when two or more timer programs
overlap?
Basically, the program with the earlier recording start
time has priority. However, the recorder will start
recording the program with the later start time after
the earlier program is finished. If two programs have
the same times (but different channels, for example),
the program displayed higher up in the list in the
timer recording screen has priority.
Date
Remain 01h20m(SP)
Start
SUN 12/12 07:00
Timer Rec (View)
Stop
1/1
CH
08:00 SP Pr01
Rec Mode
New Input
Timer Rec (View)
Date Start
: SUN 12/12 07 00
Stop CH
: 00 Pr01
Rec Mode
SP
Program Set
08
ì REC
DVR-230_YP.book Page 38 Monday, July 4, 2005 5:20 PM