Pioneer DVR-545HX-S - Manual (Page 39)

Getting started 04
39
En
13 Press to continue after reading
the HDD caution.
14 Select ‘Finish Setup’ to exit
the Setup Navigator, or ‘Go Back’ if you
want to start again.
That completes basic setup using the Setup
Navigator.
• If there are blank channels with no
station, you can set these to skip using
the manual channel setting. See
Manual
CH Setting on page 140.
• DVR-940HX-S: A connected external HDD
cannot be initialized from the Setup
Navigator—please refer to
Initialize HDD
on page 132.
For users receiving digital
broadcast services
This unit can set its internal clock
automatically from digital broadcasts.
However, depending on the broadcaster, the
clock information received may not be
accurate.
Use the following procedure (while the
recorder is not recording) to set the clock
manually.
1 Press HOME MENU.
2 Select 'Initial Setup' > 'Basic' >
'Clock Setting'.
3 Highlight the time setting.
4 Press ENTER to display the
manual clock setting screen.
5 Set the correct time.
Return to automatic clock setting
• To return to the automatic clock setting,
follow the instructions for 'Replace
Channels' (page 138).
ENTER
k Setting
Line System
er Save
P
p Navigator p Navigator
In the event of HDD failure, recordings may
be lost or normal playback/recording may
not be possible.
As recordings might be lost in case of a HDD
failure, we recommend to use the HDD only
as temporary storage media.
Please copy recordings you want to keep
to recordable DVD.
Press ENTER to continue.
ENTER
k Setting
Line System
er Save
p Navigator p Navigator
S e t u p i s c o m p l e t e !
E n j o y u s i n g y o u r D V D r e c o r d e r !
F i n i s h S e t u p
G o B a c k
F i n i s h S e t u p
HOME MENU
ENTER
ENTER
DVR940HX_UK_EN.book 39 ページ ２００６年７月１２日 水曜日 午後４時５分