Pioneer DVR-545HX-S - Manual (Page 82)

Playback 08
82
En
3 Start playback.
• If you’re playing a DVD-Video or Video
CD, a disc menu may appear when you
start playback. Use the
/ / /
buttons and ENTER to navigate DVD disc
menus, and the number buttons and
ENTER for Video CD menus.
• When playing video from the HDD,
playback will automatically stop after the
end of a title is reached.
• There may be a slight pause when
playback switches from the first to the
second layer of a dual-layer disc.
• See the following sections for more
details on playing specific kinds of discs.
4 Press to stop playback.
5 When you’ve finished using the
recorder, eject the disc and switch the
recorder back into standby.
Playing DVD discs
The table below shows the basic playback
controls for DVD-Video, and recordable DVD
discs.
STOP
Press to start playback.
If
RESUME is displayed on-
screen, playback starts from
the place last stopped.
Press to stop playback.
You can resume playback from
the same point by pressing
PLAY . (Press STOP again to
cancel the resume function.)
Pauses playback, or restarts
playback when paused.
Press to start scanning. Press
repeatedly to increase the scan-
ning speed.
Press to skip to previous/next
chapter/title. (During playback
you can also use the front panel
CH +/– buttons.)
DVD+R/DVD+RW only:
PREV may not always skip to
the previous title.
Except VR mode: During play-
back, enter a chapter number
then press
ENTER to skip
directly to that chapter within
the currently playing title.
On some discs, you can also
use the number buttons to
select numbered items in the
disc menu.
VR mode only: During playback,
enter a title number then press
ENTER .
All: Press CLEAR to clear a
number entry and start again.
STOP
PAUSE
PREV NEXT
CLEAR CLEAR
ENTER
DVR940HX_UK_EN.book 82 ページ ２００６年７月１２日 水曜日 午後４時５分