Panasonic BL-WV10 User Manual
Page 14
Advertising
Getting Started
14
5.
To register another camera, connect the camera to one of the LAN jacks of
the BL-WV10 or the router, then turn the camera on by connecting it to the
power outlet.
6.
When you have finished registering all cameras, set the BL-WV10’s mode
switch to NORMAL, disconnect the DC cord from the rear of the unit,
reconnect the DC cord, then continue from “Viewing Camera Images” on
page 19. If images can be viewed from all cameras, disconnect devices as
necessary and place them where you plan to use them.
BL-WV10_GS-en.book Page 14 Wednesday, January 25, 2006 5:18 PM
Advertising