Recording, 3 recording – Panasonic BL-WV10 User Manual
Page 32
Getting Started
32
3.3
Recording
When monitoring a
camera, the image
changes from motion to a
static (still) image (30
second refresh interval).
Is the data communication status unstable due to a
poor connection to a camera?
•
Improve the connection to a camera. After
improving the connection, press STOP while
displaying the main menu (the image
disappears), then press PLAY/PAUSE to view
the motion images again.
When MotionJPEG display time is set to [ON], is the
MotionJPEG image displayed continuously beyond
the set time?
•
Select Menu display using the remote control
and press STOP (the image disappears), then
press PLAY/PAUSE to view the MotionJPEG
image again.
The time is not displayed
even though the time
display setting is set to
[ON].
Due to the limits of the TV’s display area, the time
may not be displayed entirely.
Issue
Causes and Solutions
I can’t record anything.
Is a recordable SD memory card inserted?
Is an unformatted SD memory card inserted?
Is the SD memory card write-protected?
Is there enough free space on the SD memory card?
•
Erase any unneeded data or insert a new SD
memory card.
Recorded data
disappeared from the SD
memory card.
The time displayed for a
recorded image appears
as asterisks.
Did the power go out, or did a power cable come
loose during recording?
•
This can result in a loss of data or damage to
the SD memory card. Re-initialize the card or
use a new one. (Panasonic cannot be held
liable for data loss or damaged SD memory
cards.)
Was an SD memory card removed during recording?
•
Do not remove the card during recording.
Issue
Causes and Solutions
BL-WV10_GS-en.book Page 32 Wednesday, January 25, 2006 5:18 PM