Quick setup (when not using a router) – Panasonic BL-WV10 User Manual
Page 17
Getting Started
17
English
1.4.3
Quick Setup (When Not Using a Router)
To use the BL-WV10 with your cameras, you will need to configure the BL-WV10
and your cameras. The BL-WV10’s Quick Setup utility can help you configure the
devices easily.
1.
Wait while the Quick Setup utility scans for network settings.
•
When the BL-WV10 has been configured, [Finished] is displayed and the
buzzer sounds.
•
With this connection setup, it is normal for no router to be found.
2.
Use an Ethernet cable to connect a camera to one of the LAN jacks on the
BL-WV10.
Note
•
Connect a wireless camera to the BL-WV10 using an Ethernet cable during
Quick Setup.
•
To configure a wireless camera with a wired/wireless switch, such as the
BL-C30, set the switch to WIRED during Quick Setup.
BL-WV10_GS-en.book Page 17 Wednesday, January 25, 2006 5:18 PM