Planet Technology XRT-412 - Manual (Page 31)

Set Time Zone Select the time zone of the country you are currently in.
The router will set its time based on your selection.
Time Server Address
You can manually assign time server address if the
default time server does not work.
Enable Daylight Savings
The router can also take Daylight savings into account. If
you wish to use this function, you must check/tick the
enable box to enable your daylight saving configuration
(below).
Daylight Savings
Select the period in which you wish to start and end the
daylight Savings Time
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
3.1.2 Password Settings
You can change the password required to log into XRT-412's system web-based management.
Passwords can contain 0 to 30 alphanumeric characters, and are case sensitive.
Parameters Description
Current Password
Enter your current password for the remote management
administrator to login to your Broadband router.
New Password Enter your new password
Confirmed Password Enter your new password again for verification purposes
Note: If you forget your password, you’ll have to reset the router
to the factory default with the reset button (see router’s back
panel)
26