Planet Technology XRT-412 - Manual (Page 47)

Parameters Description
Enable MAC Filtering
Check “Enable MAC Filtering” to enable MAC Filtering,
select “Deny” or “Allow” to define the access rule.
Add PC
Fill in “Client PC MAC Address” and “Comment” of the
PC, and then click “Add”. If you find any typo before
adding it and want to retype again, just click "Reset" and
the fields will be cleared.
Remove PC
If you want to remove some PC from the "MAC Filtering
Table", select the PC you want to remove in the table
and then click "Delete Selected". If you want remove all
PCs from the table, just click "Delete All" button. If you
want to clear the selection and re-select again, just click
“Reset”.
Enable IP Filtering Table
Check “Enable IP Filtering Table” to filter PC clients by
IP, select “Deny” or “Allow” to define the access rule.
Add PC
You can click Add PC to add an access control rule for
users by IP addresses.
Remove PC
If you want to remove some PC from the "IP Filtering
Table", select the PC you want to remove in the table
and then click "Delete Selected". If you want remove all
PCs from the table, just click "Delete All" button.
You can now configure other advance sections or start using the router (with the advance settings
in place)
42