Planet Technology XRT-412 - Manual (Page 48)

Add PC
Parameters Description
Client PC Description
The description for this client PC rule.
Client PC IP Address
Enter the IP address range that you wish to apply this
Access Control rule. This is the user’s IP address that
you wish to setup an Access Control rule. You can select
a range of users simply by inputting the starting users’ IP
address and the last user’s IP address in the appropriate
boxes. If you want to select only one user then input the
user’s IP address in both boxes.
Note: You need to give your LAN PC clients a
fixed/static IP address for the Access Control rule to
work properly.
Client PC Service
You can block the clients from accessing some Internet
services by checking the services you want to block.
43