Planet Technology XRT-412 - Manual (Page 49)

Protocol
This allows you to select UDP, TCP or both protocol
types you want to block.
Port Range
You can assign up to five port ranges. The router will
block clients from accessing Internet services that use
these ports.
You can now configure other advance sections or start using the router (with the advance settings
in place)
3.5.2 URL Blocking
You can block access to some Web sites from particular PCs by entering a full URL address or
just keyword of the Web site.
Parameters Description
Enable URL Blocking
Enable/disable URL Blocking
Add URL Keyword
Fill in “URL/Keyword” and then click “Add”. You can
enter the full URL address or the keyword of the web site
you want to block. If you find any typo before adding it
and want to retype again, just click "Reset" and the field
will be cleared.
Remove URL Keyword
If you want to remove some URL keyword from the
"Current URL Blocking Table", select the URL keyword
you want to remove in the table and then click "Delete
Selected". If you want remove all URL keyword from the
table, just click "Delete All" button. If you want to clear
the selection and re-select again, just click “Reset”.
You can now configure other advance sections or start using the router (with the advance settings
in place)
44