Promise Technology Network Device EX8654 - Manual (Page 118)

SuperTrak EX Series User Manual
104
Using the Miscellaneous Menu
The Miscellaneous menu enables three useful functions on SuperTrak:
•
Making the SAS Ready LED Setting (page 104)
• Making the SGPIO Backplane Setting (page 104)
• Working with the Buzzer (page 104)
Making the SAS Ready LED Setting
The LEDs for SAS disk drives stay on continuously to show Ready status, except
when the drive is processing a command. This function enables you to turn the
LEDs off.
To turn the SAS drive LEDs off:
1.
In the Main Menu, highlight Miscellaneous and press Enter.
2. Highlight SAS READY LED and press Enter.
3. Highlight your choice and press Enter.
•
On – SAS drive LEDs on continuously
• Off – SAS drive LEDs off
Making the SGPIO Backplane Setting
This function enables you to set your SuperTrak card to work your enclosure
management controller through the SGPIO connection.
To choose your enclosure management controller setting:
1.
In the Main Menu, highlight Miscellaneous and press Enter.
2. Highlight SGPIO Backplane and press Enter.
3. Highlight your choice and press Enter.
•
Generic
• AIC
• AMI
• Chenbro
• Direct LED
• Supermicro
Working with the Buzzer
The buzzer sounds to inform you that your RAID system needs attention. But the
buzzer does not specify the condition. When a continuous tone sounds, there are
multiple alarm patterns sounding at the same time.