Promise Technology Network Device EX8654 - Manual (Page 53)

Chapter 2: Installation
39
Go to one of the following procedures:
•
“Installing WebPAM PRO onto Windows” on page 39.
• “Installing WebPAM PRO onto Linux” on page 47.
Installing WebPAM PRO onto Windows
To install WebPAM PRO onto your Windows-based PC or server:
1.
Boot the PC or server, launch Windows, and log in as the Administrator.
If the computer is already running, exit all programs. If you are not logged in
as the Administrator, log out, then log in again as the Administrator.
2. Insert the Software CD into your CD-ROM drive.
The installer window opens automatically.
3. Click the WebPAM PRO Software button, then click the Install WebPAM
PRO for Windows
button.
The first WebPAM PRO installation dialog box appears.
4. In the Introduction dialog box, click the Next button to proceed with
installation.
Figure 23. Introduction dialog box
Caution
If you have WebPAM or an earlier version of WebPAM PRO on
your PC or server, manually uninstall them before you install
WebPAM PRO from the Software CD.