Promise Technology Network Device EX8654 - Manual (Page 215)

Chapter 6: Management with the CLI
201
iscsi Subsystems only. iscsi settings, including node, port,
SLP, and iSNS.
netiscsi Subsystems only. Network settings of iSCSI ports.
netmgmt Subsystems only. Network settings of management
ports.
phydrv Physical drive settings.
sas Subsystems only. SAS host interface port setting.
scsi Subsystems only. Parallel SCSI channel settings.
subsys Subsystem settings.
Following are individual Software settings, which only apply to Subsystems:
bgascheduler Background activity scheduler settings.
service Service startup type settings.
webserver Web server settings.
snmp SNMP settings.
telnet Telnet settings.
email Email settings.
netsend Netsend settings.
cim CIM settings.
user User settings.
Examples
factorydefaults -a restore -t phydrv
factorydefaults -a restore -t all
init
Usage
init [-a <action>] [-l <LdId>]
init -a start -l <LdId> [-q <size>] [-p <pattern>]
init -a stop -l <LdId>
init -a pause -l <LdId>
init -a resume -l <LdId>
Summary
The init command starts, stops, pauses, and resumes a logical drive initialization.
A full initialization writes to the entire logical drive space and takes several
minutes, depending on the size of the logical drive.