Promise Technology Network Device EX8654 - Manual (Page 61)

Chapter 2: Installation
47
Installing WebPAM PRO onto Linux
To install WebPAM PRO onto your Linux-based PC or server:
1.
Boot the PC or server, log in as root, and launch the Linux GUI.
If the computer is already running, exit all programs. If you are not logged in
as root, log out, then log in again as root.
2. Insert the Software CD into your CD-ROM drive.
3. Go to the WebPAM PRO / Linux directory on the CD-ROM and copy the
WebPAMPRO...Linux.bin
file to the root directory.
4. Open a terminal window and type sh followed by the exact name of the
./WebPAMPRO...Linux.bin
file, then press Enter.
After several moments, the first WebPAM PRO installation dialog box
appears.
5. In the Introduction dialog box, click the Next button to proceed with
installation.
Figure 31. Introduction dialog box
Important
Check the SuperTrak Read Me file for any issues pertaining to the
distribution and version of Linux OS that you are running.