Polaroid Polaview 220 - Manual (Page 14)

Connector panel
All connections between the projector and your computer or
video source are made on the rear connector panel.
The connector panel
Note: Whenever you connect the projector to a computer or
video source for the first time, the projector defaults to the
factory settings. Due to operational differences between
computers and video sources, it may be necessary to make
minor adjustments to the settings. See
Image optimization
in Chapter 4, Using the projector for more information. The
projector stores any modified settings and defaults to them
when you turn the power off and on again.
10 Detailed setup
L R
SOURCE 1
VIDEO INPUTS
L R STEREO
MAC / PC
STEREO
PC / MAC
STEREO
REDRIVE
L R
RS 232
SOURCE 2 SOURCE 3 SOURCE 4 OUTPUTS
COMPUTER INPUTS
CAUTION !
For continued protection against the risk of fire,
replace only with the same type and rating of fuse.
Double pole / Neutral fusing
Type and Rating: T Slow-blow, 6.3A, 250V-
Input: 120/230V~
60/50Hz,5.0/2.5A