Replacing the lamp assembly – Polaroid Polaview 220 User Manual
Page 33
Advertising
Replacing the lamp assembly
When you notice that the output from the projector lamp
starts to weaken, you need to replace the lamp assembly
(part number 623374).
Caution:
Replace the lamp assembly at the first sign of the
bulb weakening. Do not wait for bulb to burn out as it is
possible for the failing bulb to burst.
1 Turn off the projector.
2 Unplug the projector power cord from the wall socket and
from the power receptacle.
Remove the lamp-
Depress the latch on the top center edge of the door and
assembly door
pull the top edge of the door toward you. Refer to the
illustration below.
The lamp assembly
and lamp-assembly
door
30 Maintenance
Door latch
Locking key
Handle
D LP
Advertising